About Me

My photo
Toronto, Ontario, Canada
"To take a photograph is to align the head, the eye and the heart. It's a way of life." ~ Henri Cartier-Bresson

Thursday, June 9, 2011

How To Make a Daguerreotype Photograph

If you're thinking that creating a daguerreotype can't be easy, you're right. Given the hazardous nature of the procedure involved in preparing the medium, it also might get you on some government watch lists. To create a true daguerreotype, you'll need to assemble a long list of difficult to obtain chemicals, supplies and pieces of equipment. For the curious, though, here's an overview:



by Takashi Arai

Step 1. Start with a silver-plated piece of copper and polish it to as close to a mirror finish as possible. Most daguerreotypists use a bench grinder outfitted with a polishing wheel to prepare their plates.

Step 2. The next step is to "sensitize" the plate. Place the plate into a sealed box containing a shallow tub filled with iodine crystals. After a few minutes of exposure to the iodine vapors, your silver plate should take on a purplish hue. Most "dag artists" use specially-constructed coating boxes with a sliding element at the top, allowing them to slide a plate into the vapor-filled box, then slide it out without touching the plate or exposing themselves to the vapors. Iodine vapors are extremely harmful and dangerous to work with, so precautions such as ventilators and respirators are a must.

Step 3. Mount the sensitized plate onto your camera's film holder and seal the camera.

Step 4. Pick a well-lit, stationary subject to capture. Choose something as close to totally stationary as possible, as exposure can take between 1 and 7 minutes depending on the light. Obviously, bright sunlight works best. Instructables.com member duckarrowtypes has created an exposure cheatsheet for daguerreotypes PDF link.

Step 5. In a darkroom, remove your exposed plate and tape a sheet of Amberlith film on top of it. Seal the edges with light-proof tape (both can be purchased at an art supply or photo supply store) and place it in the sun for two hours. This will develop your image, and you should start seeing results within the first 30 minutes or so. This is actually different than Louis Daguerre's original method -- he used mercury vapors to develop the image. This method is much easier, safer and less expensive.

Step 6. Now it's time to wash your plate. Mix up a Hypo clearing agent in a developing tray place the plate into the solution-filled tray. Don't let any bubbles form on the surface of the plate when you're getting it wet, otherwise your image will be ruined. Once the plate is fully submerged, gently stir the solution until your image shows on the plate as clear black and white. Follow with a water bath (using the same care in immersion) to wash away any remaining silver halide particles.

Step 7. At this point, your image is just dust on a silver plate. Touching it, brushing against it, or dropping water directly onto it will ruin it. Quickly preserve it by mounting it behind a piece of glass in a specially-constructed daguerreotype holder. You can buy an antique holder, make your own, or have one constructed by a frame shop.

Tip: Instructables.com has a detailed tutorial on how to create a modern daguerreotype using this method.

Tip: Any modern camera with a manual exposure switch will do for making daguerreotypes. A view camera is best. Using a vintage camera can lend some credibility, but they can be costly. In May 2007, an anonymous buyer paid nearly $800,0000 for an original 1839 camera made by Susse Frères.

Tip: Apprentice with an active daguerreotype maker to learn the secrets of the trade. According to Wikipedia there are fewer than 100 people still working with daguerreotype images. Some, like North Carolina photographer Jonathan Danforth offer two-day instructional courses.

via Wired




No comments:

Post a Comment